Check Water Calibration

Possible Cause #

• Water levels don't match calibration figures.

What to Check - Phone #

• Sprayhead, sprayhead tube.
• Check date on water filter.
• Check water lines into and out of filter for water sediment build-up.

What to Check - Field #

• All 3 solenoid valves
• Brew dump valve
• Flow control/strainer
• Internal/External water lines
• Water level probe

Action Needed - Phone #

1. Replace sprayhead
2. Change water filter as needed.

Action Needed - Field #

1. Replace external flow control/strainer.
2. Check brew cycle, hot water by-pass and cold water dilution calibrations and adjust as needed.
3. Clean or replace probe.
4. Ensure the yellow shut-off knob is full vertical on cold water dilution valve.

Caution #

Resolution

Did Check Water Calibration resolve the issue?

Yes, resolution code 208.

No, go to next step.